Covert Entry Belt

Covert Entry Belt

• Rugged and easily adjustable Concealed Zipper Pouch:

  • Medium/Large -28" L x 1.5" H

  • X-Large 30" L x 1.5" H

• Plastic Delrin Cam Lock Buckle.

• Widths:

  • 30mm (1.25" inches)

  • 38mm (1.5" inches)

• Unisex Belt

*These sizes are recommended to allow a 6" tail of excess to pull through belt loops.

TRIM TO FIT: This belt can be trimmed to fit. Trim the tail end of the belt with a pair of scissors to your desired length. Prevent fraying by sealing the edge with a flat heat source, such as the flat side of an iron, turned up to the hottest setting. Once the iron is cool any residue will wipe off. Money Belts can only be trimmed to fit up to 6", due to the hidden zipper compartment.

B1 - Complete 18 piece 8/60 Tool Set & Belt - $107.95

• 8/60 Lock Pick Tool Set

  • 7T Hook, Medium Flat

  • 8T Hook, Large Round

  • 11T Wave Rake Large Quad Cycloid

  • 12T Wave Rake Small Quint Cycloid

  • Z Bar

• 8/60 Comb Picks

  • 4-Pin Comb: Master 40mm series solid body padlocks and various clones of this common design. (M140, M141, etc.)

  • 5-Pin Comb: Master 50 and 60mm solid body padlocks and some Abus padlocks. (M150, M160, Abus 55/60)

  • 6-Pin Comb (Standard): Master 6-Pin Puck Locks and Trailer Hitch locks (A2000, A2001, 6271), American Series 748 and other locks utilizing the American 2001 series cylinder

  • 6-Pin Comb (Thin): This comb works on all the above 6-Pin cylinders and those with tighter keyways.

• 8/60 Jigglers & Quick Stick

  • This set is composed of our three most useful jigglers. This tool is fairly simple to use as it does not require the use of a separate tension tool, since the method of use involves a built-in tension. The set is for standard size wafer key ways (Filing cabinets, access panels, and even car doors are often vulnerable).

  • Designed to quickly open many heel and toe locking dogs on padlocks, as well as keyways on most file cabinet locks and tool chests. By simply bypassing the pins on a keyway all together, the Quick Stick can release the locking dog faster than standard picking often can.

• 8/60 Wards

  • Warded locks are often seen on lockers, access panels, and office furniture. Warded picks are designed to pick both modern and older Warded Locks. Made from full hardened stainless steel and designed to withstand the torsion needed to open even weathered locks. 8mm x 60mm

B2 - 8/60 Lock Picks, and Combs $74.95

• 8/60 Lock Pick Tool Set

  • 7T Hook, Medium Flat

  • 8T Hook, Large Round

  • 11T Wave Rake Large Quad Cycloid

  • 12T Wave Rake Small Quint Cycloid

  • Z Bar

• 8/60 Comb Picks

  • 4-Pin Comb: Master 40mm series solid body padlocks and various clones of this common design. (M140, M141, etc.)

  • 5-Pin Comb: Master 50 and 60mm solid body padlocks and some Abus padlocks. (M150, M160, Abus 55/60)

  • 6-Pin Comb (Standard): Master 6-Pin Puck Locks and Trailer Hitch locks (A2000, A2001, 6271), American Series 748 and other locks utilizing the American 2001 series cylinder

  • 6-Pin Comb (Thin): This comb works on all the above 6-Pin cylinders and those with tighter keyways.

B3 - S.S. Bogota Lock Picks & Belt - $45

• Single Hump

• Triple Hump

• The handle end of each Bogota® doubles as a tension wrench. Crafted from full hard 301 stainless steel. Light and covert, the Bogota® is the new "go-to" tool for operators.

• Comes in Vinyl sleeve.

• Dimensions: approximately 1/8" X 3"